/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Places code. * * The Initial Developer of the Original Code is * Google Inc. * Portions created by the Initial Developer are Copyright (C) 2005 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Brett Wilson * Dietrich Ayala * Marco Bonardo * Asaf Romano * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /** * Using Places services on quit-application or later is not reliable, so make * sure to do shutdown work on quit-application-granted, or history * synchronization could fail, losing latest changes. */ #include "nsISupports.idl" #include "nsIArray.idl" #include "nsIURI.idl" #include "nsIVariant.idl" interface nsIFile; interface nsINavHistoryContainerResultNode; interface nsINavHistoryQueryResultNode; interface nsINavHistoryQuery; interface nsINavHistoryQueryOptions; interface nsINavHistoryResult; interface nsINavHistoryBatchCallback; interface nsITreeColumn; interface nsIWritablePropertyBag; [scriptable, uuid(464ae28f-3a9c-4483-afb2-bb0fb0ddb893)] interface nsINavHistoryResultNode : nsISupports { /** * Indentifies the parent result node in the result set. This is null for * top level nodes. */ readonly attribute nsINavHistoryContainerResultNode parent; /** * The history-result to which this node belongs. */ readonly attribute nsINavHistoryResult parentResult; /** * URI of the resource in question. For visits and URLs, this is the URL of * the page. For folders and queries, this is the place: URI of the * corresponding folder or query. This may be empty for other types of * objects like host containers. */ readonly attribute AUTF8String uri; /** * Identifies the type of this node. This node can then be QI-ed to the * corresponding specialized result node interface. */ const unsigned long RESULT_TYPE_URI = 0; // nsINavHistoryResultNode const unsigned long RESULT_TYPE_VISIT = 1; // nsINavHistoryVisitResultNode const unsigned long RESULT_TYPE_FULL_VISIT = 2; // nsINavHistoryFullVisitResultNode const unsigned long RESULT_TYPE_DYNAMIC_CONTAINER = 4; // nsINavHistoryContainerResultNode const unsigned long RESULT_TYPE_QUERY = 5; // nsINavHistoryQueryResultNode const unsigned long RESULT_TYPE_FOLDER = 6; // nsINavHistoryQueryResultNode const unsigned long RESULT_TYPE_SEPARATOR = 7; // nsINavHistoryResultNode const unsigned long RESULT_TYPE_FOLDER_SHORTCUT = 9; // nsINavHistoryQueryResultNode readonly attribute unsigned long type; /** * Title of the web page, or of the node's query (day, host, folder, etc) */ readonly attribute AUTF8String title; /** * Total number of times the URI has ever been accessed. For hosts, this * is the total of the children under it, NOT the total times the host has * been accessed (this would require an additional query, so is not given * by default when most of the time it is never needed). */ readonly attribute unsigned long accessCount; /** * This is the time the user accessed the page. * * If this is a visit, it is the exact time that the page visit occurred. * * If this is a URI, it is the most recent time that the URI was visited. * Even if you ask for all URIs for a given date range long ago, this might * contain today's date if the URI was visited today. * * For hosts, or other node types with children, this is the most recent * access time for any of the children. * * For days queries this is the respective endTime - a maximum possible * visit time to fit in the day range. */ readonly attribute PRTime time; /** * This URI can be used as an image source URI and will give you the favicon * for the page. It is *not* the URI of the favicon, but rather something * that will resolve to the actual image. * * In most cases, this is an annotation URI that will query the favicon * service. If the entry has no favicon, this is the chrome URI of the * default favicon. If the favicon originally lived in chrome, this will * be the original chrome URI of the icon. */ readonly attribute AUTF8String icon; /** * This is the number of levels between this node and the top of the * hierarchy. The members of result.children have indentLevel = 0, their * children have indentLevel = 1, etc. The indent level of the root node is * set to -1. */ readonly attribute long indentLevel; /** * You can use this to associate temporary information with the result node. * This property bag is associated with the result node and is not persisted * in any way. */ readonly attribute nsIWritablePropertyBag propertyBag; /** * When this item is in a bookmark folder (parent is of type folder), this is * the index into that folder of this node. These indices start at 0 and * increase in the order that they appear in the bookmark folder. For items * that are not in a bookmark folder, this value is -1. */ readonly attribute long bookmarkIndex; /** * If the node is an item (bookmark, folder or a separator) this value is the * row ID of that bookmark in the database. For other nodes, this value is * set to -1. */ readonly attribute long long itemId; /** * If the node is an item (bookmark, folder or a separator) this value is the * time that the item was created. For other nodes, this value is 0. */ readonly attribute PRTime dateAdded; /** * If the node is an item (bookmark, folder or a separator) this value is the * time that the item was last modified. For other nodes, this value is 0. * * @note When an item is added lastModified is set to the same value as * dateAdded. */ readonly attribute PRTime lastModified; /** * For uri nodes, this is a sorted list of the tags, delimited with commans, * for the uri represented by this node. Otherwise this is an empty string. */ readonly attribute AString tags; }; /** * When you request RESULT_TYPE_VISIT from query options, you will get this * interface for each item, which includes the session ID so that we can * group items from the same session together. */ [scriptable, uuid(8e2c5a86-b33d-4fa6-944b-559af7e95fcd)] interface nsINavHistoryVisitResultNode : nsINavHistoryResultNode { /** * This indicates the session ID of the * visit. This is used for session * grouping when a tree view is sorted by date. */ readonly attribute long long sessionId; }; /** * This structure will be returned when you request RESULT_TYPE_FULL_VISIT in * the query options. This includes uncommonly used information about each * visit. */ [scriptable, uuid(c49fd9d5-56e2-43eb-932c-f933f28cba85)] interface nsINavHistoryFullVisitResultNode : nsINavHistoryVisitResultNode { /** * This indicates the visit ID of the visit. */ readonly attribute long long visitId; /** * This indicates the referring visit ID of the visit. The referrer should * have the same sessionId. */ readonly attribute long long referringVisitId; /** * Indicates the transition type of the visit. * One of nsINavHistoryService.TRANSITION_* */ readonly attribute long transitionType; }; /** * Base class for container results. This includes all types of groupings. * Bookmark folders and places queries will be QueryResultNodes which extends * these items. */ [scriptable, uuid(f9c8e1c1-e701-44ad-893c-8504c3956929)] interface nsINavHistoryContainerResultNode : nsINavHistoryResultNode { /** * Set this to allow descent into the container. When closed, attempting * to call getChildren or childCount will result in an error. You should * set this to false when you are done reading. * * For HOST and DAY groupings, doing this is free since the children have * been precomputed. For queries and bookmark folders, being open means they * will keep themselves up-to-date by listening for updates and re-querying * as needed. */ attribute boolean containerOpen; /** * This indicates whether this node "may" have children, and can be used * when the container is open or closed. When the container is closed, it * will give you an exact answer if the node can easily be populated (for * example, a bookmark folder). If not (for example, a complex history query), * it will return true. When the container is open, it will always be * accurate. It is intended to be used to see if we should draw the "+" next * to a tree item. */ readonly attribute boolean hasChildren; /** * This gives you the children of the nodes. It is preferrable to use this * interface over the array one, since it avoids creating an nsIArray object * and the interface is already the correct type. * * @throws NS_ERROR_NOT_AVAILABLE if containerOpen is false. */ readonly attribute unsigned long childCount; nsINavHistoryResultNode getChild(in unsigned long aIndex); /** * Returns false if this node's list of children can be modified * (adding or removing children, or reordering children), or true if * the UI should not allow the list of children to be modified. * This is false for bookmark folder nodes unless setFolderReadOnly() has * been called to override it, and true for non-folder nodes. */ readonly attribute boolean childrenReadOnly; // -------------------------------------------------------------------------- // Dynamic container /** * This is a string representing the dynamic container API service that is * responsible for this container. This throws if if the node is not a dynamic * container. */ readonly attribute AUTF8String dynamicContainerType; /** * Appends a full visit node to this container and returns it. For the dynamic * container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * @see nsINavHistoryURIResultNode for parameters. */ nsINavHistoryResultNode appendURINode( in AUTF8String aURI, in AUTF8String aTitle, in PRUint32 aAccessCount, in PRTime aTime, in AUTF8String aIconURI); /** * Appends a full visit node to this container and returns it. For the dynamic * container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * @see nsINavHistoryVisitResultNode for parameters. * * UNTESTED: Container API functions are commented out until we can test */ /*nsINavHistoryVisitResultNode appendVisitNode( in AUTF8String aURI, in AUTF8String aTitle, in PRUint32 aAccessCount, in PRTime aTime, in AUTF8String aIconURI, in PRInt64 aSession);*/ /** * Appends a full visit node to this container and returns it. For the dynamic * container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * @see nsINavHistoryFullVisitResultNode for parameters. * * UNTESTED: Container API functions are commented out until we can test */ /*nsINavHistoryFullVisitResultNode appendFullVisitNode( in AUTF8String aURI, in AUTF8String aTitle, in PRUint32 aAccessCount, in PRTime aTime, in AUTF8String aIconURI, in PRInt64 aSession, in PRInt64 aVisitId, in PRInt64 aReferringVisitId, in PRInt32 aTransitionType);*/ /** * Appends a container node to this container and returns it. For the dynamic * container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * aContainerType should be RESULT_TYPE_DYNAMIC_CONTAINER. * When type is dynamic container you must * specify a dynamic container type, otherwise, the dynamic container type must * be null. Use appendQueryNode and appendFolderNode for the other container * types. * * UNTESTED: Container API functions are commented out until we can test */ /*nsINavHistoryContainerResultNode appendContainerNode( in AUTF8String aTitle, in AUTF8String aIconURI, in PRUint32 aContainerType, in AUTF8String aDynamicContainerType);*/ /** * Appends a query node to this container and returns it. For the dynamic * container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * Normally you should supply an empty string for IconURI and it will take * the default query icon for the current theme. * * UNTESTED: Container API functions are commented out until we can test */ /*nsINavHistoryQueryResultNode appendQueryNode( in AUTF8String aQueryURI, in AUTF8String aTitle, in AUTF8String aIconURI);*/ /** * Appends a bookmark folder node to this container and returns it. For the * dynamic container API. TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening() * ONLY, and only for non-bookmark-folder containers. * * All container attributes will come from the boomkarks service for this * folder. */ nsINavHistoryContainerResultNode appendFolderNode(in PRInt64 aFolderId); /** * Clears all children of this container. For the dynamic container API. * TO BE CALLED FROM nsIDynamicContainer::OnContainerOpening and * nsIDynamicContainer::OnContainerClosed ONLY, and valid only for * non-bookmark-folder containers. * * UNTESTED: Container API functions are commented out until we can test */ /*void clearContents();*/ }; /** * Used for places queries and as a base for bookmark folders. * * Note that if you request places to *not* be expanded in the options that * generated this node, this item will report it has no children and never try * to populate itself. */ [scriptable, uuid(ea17745a-1852-4155-a98f-d1dd1763b3df)] interface nsINavHistoryQueryResultNode : nsINavHistoryContainerResultNode { /** * Get the queries which build this node's children. * Only valid for RESULT_TYPE_QUERY nodes. */ void getQueries(out unsigned long queryCount, [retval,array,size_is(queryCount)] out nsINavHistoryQuery queries); /** * Get the options which group this node's children. * Only valid for RESULT_TYPE_QUERY nodes. */ readonly attribute nsINavHistoryQueryOptions queryOptions; /** * For both simple folder nodes and simple-folder-query nodes, this is set * to the concrete itemId of the folder. Otherwise, this is set to -1. */ readonly attribute long long folderItemId; }; /** * Allows clients to observe what is happening to a result as it updates itself * according to history and bookmark system events. Register this observer on a * result using registerView * * @see nsINavHistoryResult for where this fits in */ [scriptable, uuid(af4ac418-a687-4775-8ffa-97c160196432)] interface nsINavHistoryResultViewer : nsISupports { /** * Called when 'aItem' is inserted into 'aParent' at index 'aNewIndex'. * The item previously at index (if any) and everything below it will have * been shifted down by one. The item may be a container or a leaf. */ void nodeInserted(in nsINavHistoryContainerResultNode aParent, in nsINavHistoryResultNode aNode, in unsigned long aNewIndex); /** * Called whan 'aItem' is removed from 'aParent' at 'aOldIndex'. The item * may be a container or a leaf. This function will be called after the item * has been removed from its parent list, but before anything else (including * NULLing out the item's parent) has happened. */ void nodeRemoved(in nsINavHistoryContainerResultNode aParent, in nsINavHistoryResultNode aItem, in unsigned long aOldIndex); /** * Called whan 'aItem' is moved from 'aOldParent' at 'aOldIndex' to * aNewParent at aNewIndex. The item may be a container or a leaf. * * XXX: at the moment, this method is called only when an item is moved * within the same container. When an item is moved between containers, * a new node is created for the item, and the itemRemoved/itemAdded methods * are used. */ void nodeMoved(in nsINavHistoryResultNode aNode, in nsINavHistoryContainerResultNode aOldParent, in unsigned long aOldIndex, in nsINavHistoryContainerResultNode aNewParent, in unsigned long aNewIndex); /** * Called right after aNode's title has changed. * * @param aNode * a result node * @param aNewTitle * the new title */ void nodeTitleChanged(in nsINavHistoryResultNode aNode, in AUTF8String aNewTitle); /** * Called right after aNode's uri property has changed. * * @param aNode * a result node * @param aNewURI * the new uri */ void nodeURIChanged(in nsINavHistoryResultNode aNode, in AUTF8String aNewURI); /** * Called right after aNode's icon property has changed. * * @param aNode * a result node * * @note: The new icon is accessible through aNode.icon. */ void nodeIconChanged(in nsINavHistoryResultNode aNode); /** * Called right after aNode's time property or accessCount property, or both, * have changed. * * @param aNode * a uri result node * @param aNewVisitDate * the new visit date * @param aNewAccessCount * the new access-count */ void nodeHistoryDetailsChanged(in nsINavHistoryResultNode aNode, in PRTime aNewVisitDate, in unsigned long aNewAccessCount); /** * Called when the tags set on the uri represented by aNode have changed. * * @param aNode * a uri result node * * @note: The new tags list is accessible through aNode.tags. */ void nodeTagsChanged(in nsINavHistoryResultNode aNode); /** * Called right after the aNode's keyword property has changed. * * @param aNode * a uri result node * @param aNewKeyword * the new keyword */ void nodeKeywordChanged(in nsINavHistoryResultNode aNode, in AUTF8String aNewKeyword); /** * Called right after an annotation of aNode's has changed (set, altered, or * unset). * * @param aNode * a result node * @param aAnnoName * the name of the annotation that changed */ void nodeAnnotationChanged(in nsINavHistoryResultNode aNode, in AUTF8String aAnnoName); /** * Called right after aNode's dateAdded property has changed. * * @param aNode * a result node * @param aNewValue * the new value of the dateAdded property */ void nodeDateAddedChanged(in nsINavHistoryResultNode aNode, in PRTime aNewValue); /** * Called right after aNode's dateModified property has changed. * * @param aNode * a result node * @param aNewValue * the new value of the dateModified property */ void nodeLastModifiedChanged(in nsINavHistoryResultNode aNode, in PRTime aNewValue); /** * Called when an item is being replaced with another item at the exact * same position. * * @param aParentNode * the parent node of the node which is being replaced * @param aOldNode * the node which is being replaced * @param aNewNode * the new node * @param aParentNode * the index in aParentNode, at which a node is being replaced */ void nodeReplaced(in nsINavHistoryContainerResultNode aParentNode, in nsINavHistoryResultNode aOldNode, in nsINavHistoryResultNode aNewNode, in unsigned long aIndex); /** * Called after a container node went from closed to opened. * * @param aContainerNode * the container node which was opened */ void containerOpened(in nsINavHistoryContainerResultNode aContainerNode); /** * Called after a container node went from opened to closed. This will be * called for the topmost container that is closing, and implies that any * child containers have closed as well. * * @param aContainerNode * the container node which was closed */ void containerClosed(in nsINavHistoryContainerResultNode aContainerNode); /** * Called when something significant has happened within the container. The * contents of the container should be re-built. * * @param aContainerNode * the container node to invalidate */ void invalidateContainer(in nsINavHistoryContainerResultNode aContainerNode); /** * This is called to indicate to the UI that the sort has changed to the * given mode. For trees, for example, this would update the column headers * to reflect the sorting. For many other types of views, this won't be * applicable. * * @param sortingMode One of nsINavHistoryQueryOptions.SORT_BY_* that * indicates the new sorting mode. * * This only is expected to update the sorting UI. invalidateAll() will also * get called if the sorting changes to update everything. */ void sortingChanged(in unsigned short sortingMode); /** * Called by the result when this object is set using * nsINavHistoryResult.viewer. This will be set to NULL when the result * is being deallocated. This should not be set by other code. */ attribute nsINavHistoryResult result; }; /** * TODO: Bug 517719. * * A predefined view adaptor for interfacing results with an nsITree. This * object will remove itself from its associated result when the tree has been * detached. This prevents circular references. Users should be aware of this, * if you want to re-use the same viewer, you will need to keep your own * reference to it and re-initialize it when the tree changes. If you use this * object, attach it to a result, never attach it to a tree, and forget about * it, it will leak! */ [scriptable, uuid(fa77e4e9-9fc8-45d2-9507-0fe4f0602505)] interface nsINavHistoryResultTreeViewer : nsINavHistoryResultViewer { /** * This allows you to get at the real node for a given row index. This is * only valid when a tree is attached. */ nsINavHistoryResultNode nodeForTreeIndex(in unsigned long aIndex); /** * Reverse of nodeForFlatIndex, returns the row index for a given result node. * Returns INDEX_INVISIBLE if the item is not visible (for example, its * parent is collapsed). This is only valid when a tree is attached. The * the result will always be INDEX_INVISIBLE if not. * * Note: This sounds sort of obvious, but it got me: aNode must be a node * retrieved from the same result that this viewer is for. If you * execute another query and get a node from a _different_ result, this * function will always return the index of that node in the tree that * is attached to that result. */ const unsigned long INDEX_INVISIBLE = 0xffffffff; unsigned long treeIndexForNode(in nsINavHistoryResultNode aNode); }; /** * The result of a history/bookmark query. * * Use the "root" element to access the children of this query. * * The basic design of the system is a model-view-controller. This result object * represents the model where the data is stored. External components * provide the view and controller which define how the data looks and how * interaction happens. * [RESULT]----->[viewer]----->[controller] * | * +-- nsINavHistoryResultViewer * * The result indicates to the view when something changes through the * nsINavHistoryResultViewer interface. The viewer is set through * the nsINavHistoryResult.viewer property. */ [scriptable, uuid(d1562f6f-8d5a-4042-8524-72f747a51b18)] interface nsINavHistoryResult : nsISupports { /** * Sorts all nodes recursively by the given parameter, one of * nsINavHistoryQueryOptions.SORT_BY_* This will update the corresponding * options for this result, so that re-using the current options/queries will * always give you the current view. */ attribute unsigned short sortingMode; /** * The annotation to use in SORT_BY_ANNOTATION_* sorting modes, set this * before setting the sortingMode attribute. */ attribute AUTF8String sortingAnnotation; /** * The viewer for this result (see comment for the class for how these * objects are related). This may be null, in which case you can still * manually walk the tree using the root node. When this is non-null, you * can access the flattened list of items (flatItemCount, nodeForFlatIndex, * flatIndexForNode). */ attribute nsINavHistoryResultViewer viewer; /** * This is the root of the results. Remember that you need to open all * containers for their contents to be valid. * * When a result goes out of scope it will continue to observe changes till * it is cycle collected. While the result waits to be collected it will stay * in memory, and continue to update itself, potentially causing unwanted * additional work. When you close the root node the result will stop * observing changes, so it is good practice to close the root node when you * are done with a result, since that will avoid unwanted performance hits. */ readonly attribute nsINavHistoryContainerResultNode root; }; /** * Similar to nsIRDFObserver for history. Note that we don't pass the data * source since that is always the global history. * * DANGER! If you are in the middle of a batch transaction, there may be a * database transaction active. You can still access the DB, but be careful. */ [scriptable, uuid(14065711-8a91-4d96-ba32-59512f5401b6)] interface nsINavHistoryObserver : nsISupports { /** * Notifies you that a bunch of things are about to change, don't do any * heavy-duty processing until onEndUpdateBatch is called. */ void onBeginUpdateBatch(); /** * Notifies you that we are done doing a bunch of things and you should go * ahead and update UI, etc. */ void onEndUpdateBatch(); /** * Called when a resource is visited. This is called the first time a * resource (page, image, etc.) is seen as well as every subsequent time. * * Normally, transition types of TRANSITION_EMBED (corresponding to images in * a page, for example) are not displayed in history results (unless * includeHidden is set). Many observers can ignore _EMBED notifications * (which will comprise the majority of visit notifications) to save work. * * @param aVisitID ID of the visit that was just created. * @param aTime Time of the visit * @param aSessionID The ID of one connected sequence of visits. * @param aReferringID The ID of the visit the user came from. 0 if empty. * @param aTransitionType One of nsINavHistory.TRANSITION_* * @param aAdded Incremented by query nodes when the visited uri * belongs to them. If no such query exists, the * history result creates a new query node dynamically. * It is used in places views only and can be ignored. */ void onVisit(in nsIURI aURI, in long long aVisitID, in PRTime aTime, in long long aSessionID, in long long aReferringID, in unsigned long aTransitionType, out unsigned long aAdded); /** * Called whenever either the "real" title or the custom title of the page * changed. BOTH TITLES ARE ALWAYS INCLUDED in this notification, even though * only one will change at a time. Often, consumers will want to display the * user title if it is available, and fall back to the page title (the one * specified in the tag of the page). * * Note that there is a difference between an empty title and a NULL title. * An empty string means that somebody specifically set the title to be * nothing. NULL means nobody set it. From C++: use IsVoid() and SetIsVoid() * to see whether an empty string is "null" or not (it will always be an * empty string in either case). * */ void onTitleChanged(in nsIURI aURI, in AString aPageTitle); /** * This page and all of its visits are about to be deleted. Note: the page * may not necessarily have actually existed for this function to be called. * * @param aURI * The URI being deleted. */ void onBeforeDeleteURI(in nsIURI aURI); /** * This page and all of its visits are being deleted. Note: the page may not * necessarily have actually existed for this function to be called. * * Delete notifications are only 99.99% accurate. Batch delete operations * must be done in two steps, so first come notifications, then a bulk * delete. If there is some error in the middle (for example, out of memory) * then you'll get a notification and it won't get deleted. There's no easy * way around this. */ void onDeleteURI(in nsIURI aURI); /** * Notification that all of history is being deleted. */ void onClearHistory(); /** * A page has had some attribute on it changed. Note that for TYPED and * HIDDEN, the page may not necessarily have been added yet. */ const unsigned long ATTRIBUTE_FAVICON = 3; // favicon updated, aString = favicon annotation URI void onPageChanged(in nsIURI aURI, in unsigned long aWhat, in AString aValue); /** * Called when a history entry expires. You will receive notifications that * a specific visit has expired with the time of that visit. When the last * visit for a history entry expires, the history entry itself is deleted * and aWholeEntry is set. (If your observer only cares about URLs and not * specific visits, it needs only to listen for aWholeEntry notifications). * * It is possible for a history entry to be deleted that has no visits if * something is out of sync or after a bookmark is deleted that has no * visits (thus freeing the history entry). In these cases, aVisitTime will * be 0. */ void onPageExpired(in nsIURI aURI, in PRTime aVisitTime, in boolean aWholeEntry); }; /** * This object encapsulates all the query parameters you're likely to need * when building up history UI. All parameters are ANDed together. * * This is not intended to be a super-general query mechanism. This was designed * so that most queries can be done in only one SQL query. This is important * because, if the user has their profile on a networked drive, query latency * can be non-negligible. */ [scriptable, uuid(6f5668f0-da8e-4069-a0de-6680e5cd8570)] interface nsINavHistoryQuery : nsISupports { /** * Time range for results (INCLUSIVE). The *TimeReference is one of the * constants TIME_RELATIVE_* which indicates how to interpret the * corresponding time value. * TIME_RELATIVE_EPOCH (default): * The time is relative to Jan 1 1970 GMT, (this is a normal PRTime) * TIME_RELATIVE_TODAY: * The time is relative to this morning at midnight. Normally used for * queries relative to today. For example, a "past week" query would be * today-6 days -> today+1 day * TIME_RELATIVE_NOW: * The time is relative to right now. * * Note: PRTime is in MICROseconds since 1 Jan 1970. Javascript date objects * are expressed in MILLIseconds since 1 Jan 1970. * * As a special case, a 0 time relative to TIME_RELATIVE_EPOCH indicates that * the time is not part of the query. This is the default, so an empty query * will match any time. The has* functions return whether the corresponding * time is considered. * * You can read absolute*Time to get the time value that the currently loaded * reference points + offset resolve to. */ const unsigned long TIME_RELATIVE_EPOCH = 0; const unsigned long TIME_RELATIVE_TODAY = 1; const unsigned long TIME_RELATIVE_NOW = 2; attribute PRTime beginTime; attribute unsigned long beginTimeReference; readonly attribute boolean hasBeginTime; readonly attribute PRTime absoluteBeginTime; attribute PRTime endTime; attribute unsigned long endTimeReference; readonly attribute boolean hasEndTime; readonly attribute PRTime absoluteEndTime; /** * Text search terms. */ attribute AString searchTerms; readonly attribute boolean hasSearchTerms; /** * Set lower or upper limits for how many times an item has been * visited. The default is -1, and in that case all items are * matched regardless of their visit count. */ attribute long minVisits; attribute long maxVisits; /** * When set, returns only bookmarked items, when unset, returns anything. Setting this * is equivalent to listing all bookmark folders in the 'folders' parameter. */ attribute boolean onlyBookmarked; /** * This controls the meaning of 'domain', and whether it is an exact match * 'domainIsHost' = true, or hierarchical (= false). */ attribute boolean domainIsHost; /** * This is the host or domain name (controlled by domainIsHost). When * domainIsHost, domain only does exact matching on host names. Otherwise, * it will return anything whose host name ends in 'domain'. * * This one is a little different than most. Setting it to an empty string * is a real query and will match any URI that has no host name (local files * and such). Set this to NULL (in C++ use SetIsVoid) if you don't want * domain matching. */ attribute AUTF8String domain; readonly attribute boolean hasDomain; /** * Controls the interpretation of 'uri'. When unset (default), the URI will * request an exact match of the specified URI. When set, any history entry * beginning in 'uri' will match. For example "http://bar.com/foo" will match * "http://bar.com/foo" as well as "http://bar.com/foo/baz.gif". */ attribute boolean uriIsPrefix; /** * This is a URI to match, to, for example, find out every time you visited * a given URI. Use uriIsPrefix to control whether this is an exact match. */ attribute nsIURI uri; readonly attribute boolean hasUri; /** * Test for existance or non-existance of a given annotation. We don't * currently support >1 annotation name per query. If 'annotationIsNot' is * true, we test for the non-existance of the specified annotation. * * Testing for not annotation will do the same thing as a normal query and * remove everything that doesn't have that annotation. Asking for things * that DO have a given annotation is a little different. It also includes * things that have never been visited. This allows place queries to be * returned as well as anything else that may have been tagged with an * annotation. This will only work for RESULTS_AS_URI since there will be * no visits for these items. */ attribute boolean annotationIsNot; attribute AUTF8String annotation; readonly attribute boolean hasAnnotation; /** * Limit results to items that are tagged with all of the given tags. This * attribute must be set to an array of strings. When called as a getter it * will return an array of strings sorted ascending in lexicographical order. * The array may be empty in either case. Duplicate tags may be specified * when setting the attribute, but the getter returns only unique tags. * * To search for items that are tagged with any given tags rather than all, * multiple queries may be passed to nsINavHistoryService.executeQueries(). */ attribute nsIVariant tags; /** * If 'tagsAreNot' is true, the results are instead limited to items that * are not tagged with any of the given tags. This attribute is used in * conjunction with the 'tags' attribute. */ attribute boolean tagsAreNot; /** * Limit results to items that are in all of the given folders. */ void getFolders(out unsigned long count, [retval,array,size_is(count)] out long long folders); readonly attribute unsigned long folderCount; /** * For the special result type RESULTS_AS_TAG_CONTENTS we can define only * one folder that must be a tag folder. This is not recursive so results * will be returned from the first level of that folder. */ void setFolders([const,array, size_is(folderCount)] in long long folders, in unsigned long folderCount); /** * Creates a new query item with the same parameters of this one. */ nsINavHistoryQuery clone(); }; /** * This object represents the global options for executing a query. */ [scriptable, uuid(b3d5de06-f8ef-4433-84c2-b8b237403b2a)] interface nsINavHistoryQueryOptions : nsISupports { /** * You can ask for the results to be pre-sorted. Since the DB has indices * of many items, it can produce sorted results almost for free. These should * be self-explanatory. * * Note: re-sorting is slower, as is sorting by title or when you have a * host name. * * For bookmark items, SORT_BY_NONE means sort by the natural bookmark order. */ const unsigned short SORT_BY_NONE = 0; const unsigned short SORT_BY_TITLE_ASCENDING = 1; const unsigned short SORT_BY_TITLE_DESCENDING = 2; const unsigned short SORT_BY_DATE_ASCENDING = 3; const unsigned short SORT_BY_DATE_DESCENDING = 4; const unsigned short SORT_BY_URI_ASCENDING = 5; const unsigned short SORT_BY_URI_DESCENDING = 6; const unsigned short SORT_BY_VISITCOUNT_ASCENDING = 7; const unsigned short SORT_BY_VISITCOUNT_DESCENDING = 8; const unsigned short SORT_BY_KEYWORD_ASCENDING = 9; const unsigned short SORT_BY_KEYWORD_DESCENDING = 10; const unsigned short SORT_BY_DATEADDED_ASCENDING = 11; const unsigned short SORT_BY_DATEADDED_DESCENDING = 12; const unsigned short SORT_BY_LASTMODIFIED_ASCENDING = 13; const unsigned short SORT_BY_LASTMODIFIED_DESCENDING = 14; const unsigned short SORT_BY_TAGS_ASCENDING = 17; const unsigned short SORT_BY_TAGS_DESCENDING = 18; const unsigned short SORT_BY_ANNOTATION_ASCENDING = 19; const unsigned short SORT_BY_ANNOTATION_DESCENDING = 20; /** * "URI" results, one for each URI visited in the range. Individual result * nodes will be of type "URI". */ const unsigned short RESULTS_AS_URI = 0; /** * "Visit" results, with one for each time a page was visited (this will * often give you multiple results for one URI). Individual result nodes will * have type "Visit" * * @note This result type is only supported by QUERY_TYPE_HISTORY. */ const unsigned short RESULTS_AS_VISIT = 1; /** * This is identical to RESULT_TYPE_VISIT except that individual result nodes * will have type "FullVisit". This is used for the attributes that are not * commonly accessed to save space in the common case (the lists can be very * long). * * @note Not yet implemented. See bug 409662. * @note This result type is only supported by QUERY_TYPE_HISTORY. */ const unsigned short RESULTS_AS_FULL_VISIT = 2; /** * This returns query nodes for each predefined date range where we * had visits. The node contains information how to load its content: * - visits for the given date range will be loaded. * * @note This result type is only supported by QUERY_TYPE_HISTORY. */ const unsigned short RESULTS_AS_DATE_QUERY = 3; /** * This returns nsINavHistoryQueryResultNode nodes for each site where we * have visits. The node contains information how to load its content: * - last visit for each url in the given host will be loaded. * * @note This result type is only supported by QUERY_TYPE_HISTORY. */ const unsigned short RESULTS_AS_SITE_QUERY = 4; /** * This returns nsINavHistoryQueryResultNode nodes for each day where we * have visits. The node contains information how to load its content: * - list of hosts visited in the given period will be loaded. * * @note This result type is only supported by QUERY_TYPE_HISTORY. */ const unsigned short RESULTS_AS_DATE_SITE_QUERY = 5; /** * This returns nsINavHistoryQueryResultNode nodes for each tag. * The node contains information how to load its content: * - list of bookmarks with the given tag will be loaded. * * @note Setting this resultType will force queryType to QUERY_TYPE_BOOKMARKS. */ const unsigned short RESULTS_AS_TAG_QUERY = 6; /** * This is a container with an URI result type that contains the last * modified bookmarks for the given tag. * Tag folder id must be defined in the query. * * @note Setting this resultType will force queryType to QUERY_TYPE_BOOKMARKS. */ const unsigned short RESULTS_AS_TAG_CONTENTS = 7; /** * The sorting mode to be used for this query. * mode is one of SORT_BY_* */ attribute unsigned short sortingMode; /** * The annotation to use in SORT_BY_ANNOTATION_* sorting modes. */ attribute AUTF8String sortingAnnotation; /** * Sets the result type. One of RESULT_TYPE_* which includes how URIs are * represented. */ attribute unsigned short resultType; /** * This option excludes all URIs and separators from a bookmarks query. * This would be used if you just wanted a list of bookmark folders and * queries (such as the left pane of the places page). * Defaults to false. */ attribute boolean excludeItems; /** * Set to true to exclude queries ("place:" URIs) from the query results. * Simple folder queries (bookmark folder symlinks) will still be included. * Defaults to false. */ attribute boolean excludeQueries; /** * Set to true to exclude read-only folders from the query results. This is * designed for cases where you want to give the user the option of filing * something into a list of folders. It only affects cases where the actual * folder result node would appear in its parent folder and filters it out. * It doesn't affect the query at all, and doesn't affect more complex * queries (such as "folders with annotation X"). */ attribute boolean excludeReadOnlyFolders; /** * This option excludes items from a bookmarks query * if the parent of the item has this annotation. * An example is to exclude livemark items * (parent folders have the "livemark/feedURI" annotation) * Ignored for queries over history. */ attribute AUTF8String excludeItemIfParentHasAnnotation; /** * When set, allows items with "place:" URIs to appear as containers, * with the container's contents filled in from the stored query. * If not set, these will appear as normal items. Doesn't do anything if * excludeQueries is set. Defaults to false. * * Note that this has no effect on folder links, which are place: URIs * returned by nsINavBookmarkService.GetFolderURI. These are always expanded * and will appear as bookmark folders. */ attribute boolean expandQueries; /** * Most items in history are marked "hidden." Only toplevel pages that the * user sees in the URL bar are not hidden. Hidden things include the content * of iframes and all images on web pages. Normally, you don't want these * things. If you do, set this flag and you'll get all items, even hidden * ones. Does nothing for bookmark queries. Defaults to false. */ attribute boolean includeHidden; /** * Include both redirected-from and redirected-to pages into results. */ const unsigned short REDIRECTS_MODE_ALL = 0; /** * Query results will not include redirected-to pages, but will include * redirected-from pages. */ const unsigned short REDIRECTS_MODE_SOURCE = 1; /** * Query results will not include redirected-from pages but will include * redirected-to pages. */ const unsigned short REDIRECTS_MODE_TARGET = 2; /** * Defines how redirects should be handled, see REDIRECTS_MODE_* constants * above. * Defaults to REDIRECTS_MODE_ALL. * Note: this option is effective only on QUERY_TYPE_HISTORY. */ attribute unsigned short redirectsMode; /** * Separate/group history items based on session information. Only * matters when sorting by date. */ attribute boolean showSessions; /** * This is the maximum number of results that you want. The query is exeucted, * the results are sorted, and then the top 'maxResults' results are taken * and returned. Set to 0 (the default) to get all results. * * THIS DOES NOT WORK IN CONJUNCTION WITH SORTING BY TITLE. This is because * sorting by title requires us to sort after using locale-sensetive sorting * (as opposed to letting the database do it for us). * * Instead, we get the result ordered by date, pick the maxResult most recent * ones, and THEN sort by title. */ attribute unsigned long maxResults; const unsigned short QUERY_TYPE_HISTORY = 0; const unsigned short QUERY_TYPE_BOOKMARKS = 1; /* Unified queries are not yet implemented. See bug 378798 */ const unsigned short QUERY_TYPE_UNIFIED = 2; /** * The type of search to use when querying the DB; This attribute is only * honored by query nodes. It is silently ignored for simple folder queries. */ attribute unsigned short queryType; /** * Creates a new options item with the same parameters of this one. */ nsINavHistoryQueryOptions clone(); }; [scriptable, uuid(437f539b-d541-4a0f-a200-6f9a6d45cce2)] interface nsINavHistoryService : nsISupports { /** * System Notifications: * * places-init-complete - Sent once the History service is completely * initialized successfully. * places-database-locked - Sent if initialization of the History service * failed due to the inability to open the places.sqlite * for access reasons. */ /** * This transition type means the user followed a link and got a new toplevel * window. */ const unsigned long TRANSITION_LINK = 1; /** * This transition type means that the user typed the page's URL in the * URL bar or selected it from URL bar autocomplete results, clicked on * it from a history query (from the History sidebar, History menu, * or history query in the personal toolbar or Places organizer. */ const unsigned long TRANSITION_TYPED = 2; /** * This transition is set when the user followed a bookmark to get to the * page. */ const unsigned long TRANSITION_BOOKMARK = 3; /** * This transition type is set when some inner content is loaded. This is * true of all images on a page, and the contents of the iframe. It is also * true of any content in a frame, regardless if whether or not the user * clicked something to get there. */ const unsigned long TRANSITION_EMBED = 4; /** * Set when the transition was a permanent redirect. */ const unsigned long TRANSITION_REDIRECT_PERMANENT = 5; /** * Set when the transition was a temporary redirect. */ const unsigned long TRANSITION_REDIRECT_TEMPORARY = 6; /** * Set when the transition is a download. */ const unsigned long TRANSITION_DOWNLOAD = 7; /** * Set when database is coherent */ const unsigned short DATABASE_STATUS_OK = 0; /** * Set when database did not exist and we created a new one */ const unsigned short DATABASE_STATUS_CREATE = 1; /** * Set when database was corrupt and we replaced it */ const unsigned short DATABASE_STATUS_CORRUPT = 2; /** * Set when database schema has been upgraded */ const unsigned short DATABASE_STATUS_UPGRADED = 3; /** * Returns the current database status */ readonly attribute unsigned short databaseStatus; /** * True if there is any history. This can be used in UI to determine whether * the "clear history" button should be enabled or not. This is much better * than using BrowserHistory.count since that can be very slow if there is * a lot of history (it must enumerate each item). This is pretty fast. */ readonly attribute boolean hasHistoryEntries; /** * Gets the original title of the page. */ AString getPageTitle(in nsIURI aURI); /** * This is just like markPageAsTyped (in nsIBrowserHistory, also implemented * by the history service), but for bookmarks. It declares that the given URI * is being opened as a result of following a bookmark. If this URI is loaded * soon after this message has been received, that transition will be marked * as following a bookmark. */ void markPageAsFollowedBookmark(in nsIURI aURI); /** * Gets the stored character-set for an URI. * * @param aURI * URI to retrieve character-set for * @returns character-set, empty string if not found */ AString getCharsetForURI(in nsIURI aURI); /** * Sets the character-set for an URI. * * @param aURI * URI to set the character-set for * @param aCharset * character-set to be set */ void setCharsetForURI(in nsIURI aURI, in AString aCharset); /** * Returns true if this URI would be added to the history. You don't have to * worry about calling this, addPageToSession/addURI will always check before * actually adding the page. This function is public because some components * may want to check if this page would go in the history (i.e. for * annotations). */ boolean canAddURI(in nsIURI aURI); /** * Call to manually add a visit for a specific page. This will probably not * be commonly used other than for backup/restore type operations. If the URI * does not have an entry in the history database already, one will be created * with no visits, no title, hidden, not typed. Adding a visit will * automatically increment the visit count for the visited page and will unhide * it and/or mark it typed according to the transition type. * * @param aURI Visited page * @param aTime Time page was visited (microseconds) * @param aReferringURI The URI of the visit that generated this one. Use * null for no referrer. * @param aTranstitionType Type of transition: one of TRANSITION_* above * @param aIsRedirect True if the given visit redirects to somewhere else. * (ie you will create an visit out of here that is a * redirect transition). This causes this page to be * hidden in normal history views (unless it has been * unhidden by visiting it with a non-redirect). * @param aSessionID The session ID that this page belongs to. Use 0 for * no session. * @returns The ID of the created visit. This will be 0 if the URI is not * valid for adding to history (canAddURI = false). */ long long addVisit(in nsIURI aURI, in PRTime aTime, in nsIURI aReferringURI, in long aTransitionType, in boolean aIsRedirect, in long long aSessionID); /** * This returns a new query object that you can pass to executeQuer[y/ies]. * It will be initialized to all empty (so using it will give you all history). */ nsINavHistoryQuery getNewQuery(); /** * This returns a new options object that you can pass to executeQuer[y/ies] * after setting the desired options. */ nsINavHistoryQueryOptions getNewQueryOptions(); /** * Executes a single query. */ nsINavHistoryResult executeQuery(in nsINavHistoryQuery aQuery, in nsINavHistoryQueryOptions options); /** * Executes an array of queries. All of the query objects are ORed * together. Within a query, all the terms are ANDed together as in * executeQuery. See executeQuery() */ nsINavHistoryResult executeQueries( [array,size_is(aQueryCount)] in nsINavHistoryQuery aQueries, in unsigned long aQueryCount, in nsINavHistoryQueryOptions options); /** * Converts a query URI-like string to an array of actual query objects for * use to executeQueries(). The output query array may be empty if there is * no information. However, there will always be an options structure returned * (if nothing is defined, it will just have the default values). */ void queryStringToQueries(in AUTF8String aQueryString, [array, size_is(aResultCount)] out nsINavHistoryQuery aQueries, out unsigned long aResultCount, out nsINavHistoryQueryOptions options); /** * Converts a query into an equivalent string that can be persisted. Inverse * of queryStringToQueries() */ AUTF8String queriesToQueryString( [array, size_is(aQueryCount)] in nsINavHistoryQuery aQueries, in unsigned long aQueryCount, in nsINavHistoryQueryOptions options); /** * Adds a history observer. If ownsWeak is false, the history service will * keep an owning reference to the observer. If ownsWeak is true, then * aObserver must implement nsISupportsWeakReference, and the history service * will keep a weak reference to the observer. */ void addObserver(in nsINavHistoryObserver observer, in boolean ownsWeak); /** * Removes a history observer. */ void removeObserver(in nsINavHistoryObserver observer); /** * Runs the passed callback in batch mode. Use this when a lot of things * are about to change. Calls can be nested, observers will only be * notified when all batches begin/end. * * @param aCallback * nsINavHistoryBatchCallback interface to call. * @param aUserData * Opaque parameter passed to nsINavBookmarksBatchCallback */ void runInBatchMode(in nsINavHistoryBatchCallback aCallback, in nsISupports aClosure); /** * True if history is disabled. currently, * history is disabled if the browser.history_expire_days pref is 0 */ readonly attribute boolean historyDisabled; /** * Import the given Mork history file. * @param file The Mork history file to import */ void importHistory(in nsIFile file); }; /** * @see runInBatchMode of nsINavHistoryService/nsINavBookmarksService */ [scriptable, uuid(5143f2bb-be0a-4faf-9acb-b0ed3f82952c)] interface nsINavHistoryBatchCallback : nsISupports { void runBatched(in nsISupports aUserData); };